103L brush 45000rpm double-lock handpiece handpiece for dental lab equipment whitening polishing

Packing List:
103L brush double-lock handpiece +wrench carbon brush

Precautions：

① When the handle is used, the handle should not be idling,
and the grinding pin must be installed.
② When installing the grinding head, the rod of the grinding head must be cleaned and cleaned,
and then loaded into the chuck.
③ Don't let water in when you are using the handpiece otherwise the handpiece will be rust.
It must clean the water out and make it dry then continue to use if water go into to handpiece.
④ The use of the foot switch must be turned off the host power,
otherwise it will affect the performance of the host circuit.
⑤ Don’t hit or make it fall down, especially the handle.
⑥ It is strictly forbidden to refuel the bearings.

We have three chuck optional:

2.35mm/3.0mm/3.175mm. Standard is 2.35mm. If you use is different,
please when you take order must remark.And we use plug, standard is EU plug.
If you need others please remark when you take an order

Purchase notice

About the receipt:
If you choose the logistics point from the mention: the logistics company local logistics point will call you,
please bring your ID card to the delivery point to pick up the goods.
If you choose the courier method, please check the following two items before signing.
1 Please confirm whether the outer packaging is damaged in the presence of the courier. If there is any damage,
please ask for the receipt after inspection.
2. Confirm that the quantity of the product is correct. If the quantity is incorrect,
please reject it and contact us in time.

About product information:

Different product batches, some information of the product may be different from the actual product,
please use the actual product information (the final interpretation right belongs to the company).

Shippment

1. TNT/FedEx/DHL/UPS recommended for samples or under 45KG weight goods,door to door.
2. Airway or Seaway recommended for mass goods airport(seaport) to airport(sea-port)
3. Lead Time: 5-10 days for sample order, 15-20 days for mass goods.
REMARK: Shipping cost depends on the total weight or volume. We can
calculate the shipping costs for your reference.

FAQ

Q1: Are you manufacturer?
A1: Yes.we are factory, but not just a factory, as we have sales team, own designers, own showroom, can help buyers to decide which products are their best choice, and all your inquiry will be replied within 24 hours
Q2: Could you accept sample order?
A2： Yes. we accept sample order for your evaluation
Q3: Could you do OEM Service?
A3: Some items accept this service, pls contact us for details
Q4: Which mode of transport would be better?
A4：In general, we advice to make delivery by sea for larger order, and for small order. Courier. By Air

Specification:

1. Name: Strong 103FN brush double-lock handpiece
2. Rotary speed: 0~45000rpm
3. Torque: 290gf.cm
4. Chuck: 2.35mm (if you need 3.0mm or 3.175mm chuck, please leave us message)
5. Weight: About 300g
6. Dimension: L15cmX3cm
7. Package: Bubble bag+foam+carton



Packet Include:

1x Strong 103FN brush double-lock handpiece

1x Wrench